Laser beauty device

Name: Wireless charging with LCD screen spotting pen
Battery: 800MAH 3.7V
Input current: 5V/1A
Output power: MAX5W
Material: ABS + steel needle
Product size: 175*28mm
Accessories: Fine needle *10
Thick needle *3
Needle sleeve *1
Instruction manual*1
Wireless charging base*1
USB data cable*1
Operation Introduction:

●Assemble the needle: Wash the needle and skin with alcohol, thicken the needle with a clockwise thick needle, insert the needle into the needle with a fine needle, and insert the needle into the hole clockwise.
●On/Off key: Long press ON/OFF for 2 seconds to turn on, the display lights up to show battery power. Then press and hold (ON/OFF) for 2 seconds to turn off. In the power-on state, if there is no operation, it will automatically shut down after 10 minutes.
● Gear switch button: After turning on the power, press the (ON/OFF) button once, the gear position is switched once, and pressing the ON/OFF button continuously switches from 1st to 6th, which is represented by the number 1.2.3.4.5.6. Gear position.
● Illumination spotlight button: After power on, double-click (ON/OFF) button to turn on the spotlight, double-click (ON/OFF) button again to turn off the spotlight.
● Discharge: After selecting the gear position, you must press and hold the (OUT) button to discharge, and the work indicator lights up. Releasing the button stops discharge and enters standby state. After 2 minutes of pressing, it will automatically enter standby state.
● Charging:
1. Use the 5V/1A adapter (the adapter needs to be purchased by the customer), connect the charging cable to the adapter and the wireless charging dock.
2. Place the spot pen on the wireless charging base. At this time, the work indicator of the pen is flashing green.
3. After the full work indicator light is steady green (charging time is about 8 hours)
Can not be charged during work, do not overcharge or run out of electricity to charge, otherwise it will affect battery life